Durability meets power. The award-winning Tungsten Smart-Heat® Gas heater series combines high-performance stainless-steel construction with strong, directional heating. Available in matte black, with two power output levels and a selection of ceiling and wall mounting options.
Turn up the heat with the Bromic Tungsten Smart-Heat® Gas Series. This powerful radiant heater can quickly heat up outdoor areas of up to 20m2 , providing a comfortable, warming red glow all year around. With its stylish matte black design and exceptional wind resistance of up to 8mph, this heater will keep you and your guests warm at any time of the year. Choose between 25 MJ and 42 MJ heating power and natural gas or propane (LPG) options.
For low clearance areas, we recommend a heat deflector to protect the mounting surface. This accessory will also provide improved weather resistance and a more directional heat output.
For greater directional control of the heater (rotates 25 degrees on each side), making it easy to adjust the flow of heat, so radiant heat is delivered where it’s needed.
The heater can be wall mounted or hung from the ceiling (with optional Ceiling Post Mount). The optimum height is 8 feet from the floor to the bottom of the heater. If the distance above the heater is less than 1100mm or if the heater will be open to the elements, a heat deflector is recommended.
Clearances
Installation
Installation must be carried out by a licensed and authorised technician in accordance with local building codes. Please refer to our installation manual for further details.
Our gas heaters are on/off only. If you’re looking for a dimmable option, the we would recommend our Bromic electric heaters, which allow for more precise control over the heat output.
How do I control the heater?
We recommend adding the Bromic On/Off controller and wireless remote, so the heater can be turned off and on from the comfort of your home. Alternatively, the heater can also be controlled via a standard wall switch.
Can this heater be connected to a smart home or building automation system?
Yes, the heater can be connected to smart home and building technology, provided the system has been fitted with a RS232 port. For this, you require our On/Off Controller and our Bromic Smart-Heat Link RS232 plugin.
Could this be installed indoors, assuming all clearances are met?
No. All Bromic Gas Heaters are intended for outdoor use. In a four sided area of installation, at least 25% of the wall area must be open, and 30% of the remaining walls must be open.
